Startseite / Legal / RoHS Compliance

RoHS Compliance

Advanced Energy is committed to protecting the environment and complying with applicable laws and regulations. A number of regulations have been enacted in jurisdictions around the world that restrict the use of certain substances in electronic products. These are often referred to as RoHS (Restriction of Hazardous Substances) regulations. Products like AE’s, which are installed, operated, and maintained by professionals in relatively limited quantities in commercial settings, are generally not the intended target of such regulations.

Our approach to these restrictions is to comply with applicable requirements, to meet market demand for solutions that go beyond compliance, and to honor our environmental commitment. In doing this, we will proceed with appropriate care to ensure we continue to meet our quality, reliability, and cost-competitiveness goals as well.

EU RoHS

Consistent with our environmental commitment, and in response to market demand, we offer a number of products that meet RoHS requirements applicable to in-scope products. For products that Advanced Energy designates as “RoHS compliant,” we’ve taken steps to ensure our management systems and procedures conform to the regulatory requirements and standards of practice for products in the scope of RoHS. Our products designated as RoHS compliant contain no substances regulated by RoHS above applicable thresholds, or they may contain small amounts of RoHS substances in specifically exempted applications. EU RoHS Directive 2002/95/EC of the European Parliament and of the Council of January 23, 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment went into effect July 1, 2006. RoHS restricts the use of four heavy metals, lead, cadmium, mercury, hexavalent chromium; and two types of flame retardants, polybrominated biphenyls (PBB) and polybrominated biphenyl ethers (PBDE).

The directive and subsequent amendments exempt certain applications. In addition, the directive’s scope is limited to specific types of electrical and electronic equipment.

China RoHS

During February 2006, a number of Chinese government agencies published Management Methods for Controlling Pollution by Electronic Information Products, which became widely known as China RoHS. The rules took effect March 1, 2007.

China RoHS regulates the same substances as EU RoHS. Since China RoHS has no legal connection to EU requirements, products must be managed to meet the specific requirements of the Chinese regulations. China RoHS sets forth labeling and disclosure requirements not part of EU RoHS. The Chinese rules also require pre-market certification and place restrictions on substances in specific product groups, based on their listing in a product catalog.

The products Advanced Energy produce are not listed in the product catalog. Advanced Energy complies with China RoHS labeling and disclosure requirements for products imported into China and new products.

RoHS Compliance in Our Factories and Service Centers

Product and Component Segregation

Advanced Energy reserves a unique class of part numbers for RoHS-compliant parts and assemblies so everyone in our supply chain, factories, and service centers can readily identify them. To prevent cross-contamination, any area where RoHS-compliant work is performed, including engineering, production, and service, has a dedicated work surface, clear labeling, such as signs and floor tape, and dedicated tools.

Verification

Advanced Energy verifies the absence of regulated substances for RoHS-designated parts and assemblies with a portable x-ray fluorescence (XRF) analyzer. XRF analysis is conducted for selected parts as an element of Advanced Energy’s incoming inspection procedures for received materials.

Training

Elimination of tin-lead solder in manufacturing is a critical part of making RoHS-compliant products. Lead-free solder has different properties than traditional tin-lead solder (such as a 35°C higher melting point) so rigorous attention to correct soldering techniques is of paramount importance. All personnel who solder components must pass RoHS-compliant product training conducted by a certified trainer.

Product RoHS and REACH Documents

Excelsys Products

EU WEEE Directive‍
CS1000 RoHS Declaration‍
CS1000 REACH 241 Declaration‍
CoolX Series RoHS Declaration‍
CoolX Series REACH 241 Declaration‍
CoolX3000 RoHS Declaration‍
CoolX3000 REACH 241 Declaration‍
UltiMod RoHS Declaration‍
UltiMod REACH 241 Declaration‍
Xgen RoHS Declaration‍
Xgen REACH 241 Declaration‍
XSolo RoHS Declaration‍
XSolo REACH 241 Declaration‍
FlexiCharge REACH 241 Declaration‍

HiTek Power Products

HiTek Power Products WEEE and RoHS Information‍

UltraVolt Products

UltraVolt AA Series REACH Declaration‍
UltraVolt A Series (1/16A, 1/8A, 1/4A, 1/2A) REACH Declaration‍
UltraVolt A Series (1A, 2A, 4A, 6A) REACH Declaration‍
UltraVolt C Series REACH Declaration‍
UltraVolt EFL Series REACH Declaration‍
UltraVolt US Series REACH Declaration‍
UltraVolt HPC Series EU & UK RoHS Declaration‍
UltraVolt HPC Series REACH 223 Declaration‍

LumaSense Products

LumaSense Series 5 Pyrometer RoHS Declaration‍
LumaSense Series 6 Pyrometer RoHS Declaration‍
LumaSense Series 8 Pyrometer RoHS Declaration‍
LumaSense Series 12 LO Pyrometer RoHS Declaration‍
LumaSense Series 12 Pyrometer RoHS Declaration‍
LumaSense Series 50 Pyrometer RoHS Declaration‍
LumaSense Series 140 Pyrometer RoHS Declaration‍
LumaSense Series 218 Pyrometer RoHS Declaration‍
LumaSense Series 300, 310 Pyrometer RoHS Declaration‍
LumaSense Series 315 Pyrometer RoHS Declaration‍
LumaSense Series 320 Pyrometer RoHS Declaration‍
LumaSense Series 510, 520 Pyrometer RoHS Declaration‍
LumaSense Series 740 Pyrometer RoHS Declaration‍
LumaSense Series UV 400, UVR 400 Pyrometer RoHS Declaration‍
LumaSense m822 Fiber Optic Thermometer RoHS Declaration‍
LumaSense m922T Fiber Optic Thermometer RoHS Declaration‍
LumaSense m924 Fiber Optic Thermometer RoHS Declaration‍

HiTek Power Products

Thyro RoHS - Europe‍
Thyro RoHS - China‍
Thyro REACH - Europe‍
Thyro Basic Bus Module REACH

Artesyn Products

Taiwan RoHs Declarations*

*Register/log in to your MyAE account to view Taiwan RoHs Declarations for Artesyn Products

Supply Chain Management

Advanced Energy's standards for RoHS compliance in our supply chain are published in Advanced Energy document number RM0042, Restricted Materials and Environmental Compliance Requirements (see Supplier Standards). Our suppliers are important partners in our material compliance efforts, and we work with them to meet RoHS compliance on designated products. Suppliers submit a RoHS Certificate of Compliance for each part and assembly that they provide to Advanced Energy. Additionally, suppliers provide a declaration of the presence of any RoHS-regulated substances and maintain documentation that demonstrates compliance, such as analytical results and sub-tier supplier certifications. Any changes to the material composition of RoHS-compliant parts must be approved by Advanced Energy in accordance with our change management procedures. Suppliers are selectively audited for compliance with Advanced Energy RoHS requirements.

Part Availability

As the worldwide electronics industry has adapted to the requirements of various RoHS regulations, the availability of parts made with substances restricted by the regulations (e.g., lead solder) has been impacted. Advanced Energy has ISO9001-certified management systems that ensure we proactively and effectively manage substitutions for discontinued parts in our released products. Any changes to specified parts are reviewed through AE’s Enterprise Change Order (ECO) process and are only implemented with Advanced Energy’s explicit, written approval.