.svg){kind=logo}
アルテシン
iMP1 Series
Active
1200 to 1500 W Configurable AC-DC Power Supplies
The iMP1 series is an AC input to DC output configurable power system consisting of a microprocessor-controlled PFC front end providing seven slots that accept intelligent DC-DC converter modules with single, dual or triple outputs ranging from 2 V to 60 V. Single output modules come in four power ranges that can be mixed and matched and connected in parallel or series to obtain thousands of output combinations customized to any application. User-configurable functions include current limit and output sequencing, as well as input and output OK signals and indicators. Capable of delivering up to 1,500 W and with up to 21 isolated outputs, the iMP1 series carries full medical safety approvals and is an extremely flexible and versatile multi-output power solution.
These digitally controlled power supplies feature a PMBus®-compliant I2C serial interface that enables parameters such as the voltage, current limit and enable/inhibit status of individual outputs to be programmed via an intuitive user GUI. The serial interface also allows remote monitoring of voltage, current and temperature.
These digitally controlled power supplies feature a PMBus®-compliant I2C serial interface that enables parameters such as the voltage, current limit and enable/inhibit status of individual outputs to be programmed via an intuitive user GUI. The serial interface also allows remote monitoring of voltage, current and temperature.
特徴
- Current Share on all outputs greater than 10A
- Field Demonstrated MTBF to 550K Hours
- Industrial Shock/Vib (>50G's)
- Industrial Temp Range (40 to 70C)
- Intelligent I2C control
- Isolated 5V @ 1A Standby Output
- Remote Sense on all outputs greater than 2A
- Efficiency 85% typical depending on configuration
- Inrush Current 40A Peak (Soft Start)
- Frequency 47-440 Hz
- Input Range 85-264 VAC; 120-350 VDC
- Input Fuse 25A
- ACOK >5mS early warning
- Holdover Storage 20 mSec min
- Radiated EMI CISPR 22/EN55022 Level B
- Leakage Current 300uA Max
- EMI Filter CISPR 22/EN55022 Level B
- Turn-on Time AC 2,0 sec; Inhibit 150mS
- Power Factor 0.99 typ @ full case load
- Recovery Time To within 1% in <300uSec
- Reverse Voltage Protection 100% of rated output
- Dynamic Response <2% or 100mV, 25% load step
- Ripple RMS 0.1%; P-P 1.0% to 20MHz
- Overall Regulation 0.4% or 20mV max
- Margining +/-4-6% of Nominal
- Programming Accuracy +/- 5%
- Factory Set Point Accuracy +/- 1%
- Adjust Range +/-10% Manual; Full Range Programmable
- DCOK +/-5% of nominal - Programmable
- Single Wire Parallel Share within 2% of total rated load
- Remote Sense Compensates up to 0.5V
- Output/Output Isolation >1 Megohm, 500V
- Safety Meets EN60950 and EN60601
- Module Switching Frequency 250kHz accepts external sync signal
メリット
- ACOK signal
- Active PFC
- Configurable Output Sequencing
- Digital monitor of Voltage, Current and Temp (Both Input and Output)
- Downloadable GUI
- EMI Conducted and Radiated to Class B
- External Switching Frequency Sync Input
- Field Replacable Intelligent Fan
- Full Medical Approval
- Global DCOK and Inhibit/Enable (Logic Programmable)
- Margin and Remote Voltage Programming
- Module DCOK and Inhibit (Logic Programmable)
- Optional Conformal Coating
- Optional Extended holdup module
- Optional extra holdup module
- Optional VME Timing and System DCOK/Reset Module
- Overload Protection on all outputs
- Programmable voltage, current limit, fan speed, Foldback or Constant Current operation
- Voltage Adjustment on all outputs (Manual or Programmable)
- OCP Programmable
- OVP Programmable
- Thermal Protection OTP/OTW Programmable
仕様
| 出力電力 (W): | 1500 |
|---|---|
| 長さ（インチ）: | 11 |
| 幅（インチ）: | 8 |
| 高さ（インチ）: | 2.5 |
| マウントタイプ: | Configurable |
| 最小出力電流 (A): | 0 |
| 最大出力電流 (A): | 300 |
| 出力電圧範囲 (V): | 2V to 60V |
コンフィグプロのご紹介
アドバンスド・エナジーの画期的なオンライン・パワー・コンフィギュレーター
300万を超える構成可能な電源の組み合わせにより、この電源ソリューションアルゴリズムはコストを最適化し、MP、IMP、IVS、およびMICROMP（UMP）構成可能電源ファミリーの理想的なソリューションを導きます。
スタート
アクセサリー
iMP Software Package
The iMP software is designed to make the iMP Power Supply Unit (PSU) accessible to the user. It is intended to provide information gathered from the PSU and interactive controls to the basic capabilities of iMP power supply.
技術文書
テクニカル・ビデオ
iMP1 USB to I2C software tutorial
8月 1, 2017
The iMP4 series is an AC input to DC output configurable power supply system consisting of a microprocessor-controlled PFC front end providing five slots that accept intelligent DC-DC converter modules with single, dual or triple outputs ranging from 2 V to 60 V. Single output modules come in four power ranges that can be mixed and matched and connected in parallel or series to obtain thousands of output combinations customized to any application. User-configurable functions include current limit and output sequencing, as well as input and output OK signals and indicators. Capable of delivering up to 1,100 watts and with up 15 isolated outputs, the iMP4 series carries full medical safety approvals and is an extremely flexible and versatile multi-output power solution. These digitally controlled power supplies feature a PMBus™-compliant I2C serial interface that enables parameters such as the voltage, current limit and enable/inhibit status of individual outputs to be programmed via an intuitive user GUI.
Close Popup
24/5サポートをご利用下さい
エンジニアによる専門的なアドバイス
当社は、お客様に優れたカスタマーサービスとテクニカルサポートを提供することをお約束します。ライブチャットと電話サポートで、適任のエンジニアにいつでもご相談いただけます。
今すぐサポートを受ける