iMP8 Series

Active

1000 to 1200 W Configurable AC-DC Power Supplies

The iMP8 series is an AC input to DC output configurable power system consisting of a microprocessor-controlled PFC front end providing six slots that accept intelligent DC-DC converter modules with single, dual or triple outputs ranging from 2 V to 60 V. Single output modules come in four power ranges that can be mixed and matched and connected in parallel or series to obtain thousands of output combinations customized to any application. User-configurable functions include current limit and output sequencing, as well as input and output OK signals and indicators. Capable of delivering up to 1,200 watts and with up to 18 isolated outputs, the iMP8 series carries full medical safety approvals and is an extremely flexible and versatile multi-output power solution.

These digitally controlled power supplies feature a PMBus^®-compliant I2C serial interface that enables parameters such as the voltage, current limit and enable/inhibit status of individual outputs to be programmed via an intuitive user GUI. The serial interface also allows remote monitoring of voltage, current and temperature.

特徴仕様技術文書 Videos Support

特徴

Current Share on all outputs greater than 10A
Field Demonstrated MTBF to 550K Hours
Industrial Shock/Vib (>50G's)
Industrial Temp Range (40 to 70C)
Intelligent I2C control
Isolated 5V @ 1A Standby Output
Remote Sense on all outputs greater than 2A
Input Range 85-264 VAC; 120-350 VDC
Frequency 47-63 Hz
Inrush Current 40A Peak (Soft Start)
Efficiency 85% typical depending on configuration
Power Factor 0.99 typ @ full case load
Turn-on Time AC 2,0 sec; Inhibit 150mS
EMI Filter CISPR 22/EN55022 Level B
Leakage Current 300uA Max
Radiated EMI CISPR 22/EN55022 Level B
Holdover Storage 20 mSec min
ACOK >5mS early warning
Input Fuse 20A
Margining +/-4-6% of Nominal
Programming Accuracy +/- 5%
Factory Set Point Accuracy +/- 1%
Adjust Range +/-10% Manual; Full Range Programmable
Overall Regulation 0.4% or 20mV max
Ripple RMS 0.1%; P-P 1.0% to 20MHz
Dynamic Response <2% or 100mV, 25% load step
Reverse Voltage Protection 100% of rated output
Recovery Time To within 1% in <300uSec
Remote Sense Compensates up to 0.5V
Single Wire Parallel Share within 2% of total rated load
DCOK +/-5% of nominal - Programmable
Output/Output Isolation >1 Megohm, 500V
Safety Meets EN60950 and EN60601
Module Switching Frequency 250kHz accepts external sync signal

メリット

ACOK signal
Active PFC
Configurable Output Sequencing
Digital monitor of Voltage, Current and Temp (Both Input and Output)
Downloadable GUI
EMI Conducted and Radiated to Class B
External Switching Frequency Sync Input
Field Replacable Intelligent Fan
Full Medical Approval
Global DCOK and Inhibit/Enable (Logic Programmable)
Margin and Remote Voltage Programming
Module DCOK and Inhibit (Logic Programmable)
Optional Conformal Coating
Optional Extended holdup module
Optional extra holdup module
Optional VME Timing and System DCOK/Reset Module
Overload Protection on all outputs
Programmable voltage, current limit, fan speed, Foldback or Constant Current operation
Voltage Adjustment on all outputs (Manual or Programmable)
OVP Programmable
OCP Programmable
Thermal Protection OTP/OTW Programmable

仕様

出力電力 (W):	1200
長さ（インチ）:	10
幅（インチ）:	7
高さ（インチ）:	2.5
マウントタイプ:	Configurable
最小出力電流 (A):	0
最大出力電流 (A):	240
出力電圧範囲 (V):	2V to 60V
最小出力（W）:	0
最大出力（W）:	1200
Minimum Input Voltage (V):	85
最大入力電圧 (V):	264
保証期間（年）:	2

すべての仕様仕様の崩壊

コンフィグプロのご紹介

アドバンスド・エナジーの画期的なオンライン・パワー・コンフィギュレーター

300万を超える構成可能な電源の組み合わせにより、この電源ソリューションアルゴリズムはコストを最適化し、MP、IMP、IVS、およびMICROMP（UMP）構成可能電源ファミリーの理想的なソリューションを導きます。

スタート

技術文書

タイトル	タイプ
iMP Series Data Sheet (3 MB)	データシート
73-580-0001I RoHS2 CoC (27 KB)	RoHS証明書
73-580-5097I (IMP8-3L0-1D0-1E0-1Z0-03-B-597) RoHS2 CoC (95 KB)	RoHS証明書
iMP8 CCC Certificate (Cavite) (1 MB)	安全証明書
iMP8 CCC Certificate (Laguna) (1 MB)	安全証明書
iMP8_CB Certificate (ITE) (1 MB)	安全証明書
iMP8_CB Certificate (MED) (1 MB)	安全証明書
iMP8_CE Declaration of Conformity (194 KB)	安全証明書
iMP8_TUV Certificate (400 KB)	安全証明書
iMP8_UKCA Declaration of Conformity (201 KB)	安全証明書
iMP8_UL ITE Certificate (21 KB)	安全証明書
iMP8_UL Medical Certificate (462 KB)	安全証明書
iMP GUI Software Technical Reference Note (2 MB)	テクニカル・リファレンス
iMP Series I2C Protocol (780 KB)	テクニカル・リファレンス
iMP Series Technical Reference Note (11 MB)	テクニカル・リファレンス
Marketing Bulletin_MP Series (603 KB)	テクニカル・リファレンス
Marketing Bulletin_MP Series End of Life (584 KB)	テクニカル・リファレンス
Understanding the real benefits of flexibility and configurability in power systems design - Chinese Version (1 MB)	ホワイトペーパー
Understanding the real benefits of flexibility and configurability in power systems design - Korean Version (1 MB)	ホワイトペーパー

テクニカル・ビデオ

iMP1 USB to I2C software tutorial

8月 1, 2017

The iMP4 series is an AC input to DC output configurable power supply system consisting of a microprocessor-controlled PFC front end providing five slots that accept intelligent DC-DC converter modules with single, dual or triple outputs ranging from 2 V to 60 V. Single output modules come in four power ranges that can be mixed and matched and connected in parallel or series to obtain thousands of output combinations customized to any application. User-configurable functions include current limit and output sequencing, as well as input and output OK signals and indicators. Capable of delivering up to 1,100 watts and with up 15 isolated outputs, the iMP4 series carries full medical safety approvals and is an extremely flexible and versatile multi-output power solution. These digitally controlled power supplies feature a PMBus™-compliant I2C serial interface that enables parameters such as the voltage, current limit and enable/inhibit status of individual outputs to be programmed via an intuitive user GUI.