ADO300 Series

Artesyn has a growing range of digital DC-DC converters in standard brick outline and pin configurations. Our single-output isolated modules (ADO300, ADQ500, ADQ700) offer excellent thermal performance, which, together with an enhanced pre-bias start-up capability, makes them an ideal choice for use in data processing and telecommunication applications, particularly for supplying power to non-isolated modules. Their open-frame design is optimized for forced air or conduction cooling. An aluminum baseplate option is available for enhanced thermal performance. In digital non-isolated modules, Artesyn offers the LGA80D, which represents one of the highest density current ratings available in the industry. This innovative unit offers two 40 amp outputs, which can either be configured to a single 80 amp output or completely independently controlled. It is also possible to generate a higher current, up to 320 amps as a single power rail, by connecting up to four units in parallel. The wide trim feature of the LGA80D makes it suitable for use with a broad range of semiconductor devices. The efficiency of the LGA80D is one of the highest available in this category. Artesyn offers two evaluation kits for the range of digital DC-DC modules, to cover the isolated and non-isolated units. Using these evaluation kits, you can connect the demonstration board to a USB socket on a PC with the PMBus interface dongle and cable provided, and control and monitor the DC-DC modules as they would be used in an application. The isolated demonstration board can be connected to the non-isolated board, enabling you to test the full DC-DC conversion process from 48 volt DC input at the system level to the low voltages at the processor level, with digital control throughout. For more information, please visit https://www.artesyn.com/power/power-supplies/cat/169/pmbus-interface-dc-dc-converters