ARTESYN™
LPS100-M
Active
80 to 150 W AC-DC Medical Power Supplies
The LPS100-M series of open-frame AC-DC power supplies features ITE and medical safety approvals. The series offers a choice of six single output models, with voltages of 5 V, 12 V, 15 V, 48 V or 54 VDC. Each model also provides an isolated 12 V fan output. The main output of the 54 V model features POE (Power over Ethernet) isolation. LPS100-M series power supplies have a typical full load power conversion efficiency of 88% and with a height of only 1.29 inches offer a power density in excess of 14 W per cubic inch. The series is primarily designed for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.
특징
- Frequency 47 - 63 Hz
- Input range 90 - 264 VAC, 120 - 300 VDC
- Inrush current 50 A max., cold start @ 25°C
- Power factor 0.99 typical
- Safety ground leakage current 275 uA @ 50/60 Hz, 264 VAC input
- Fan Output 12 V @ 1 A isolated, +/-5%
- Efficiency 88% typical at full load
- Adjustment range ±10% minimum on the main output
- Hold-up time 10 ms @ 125 W load, 120 VAC input
- Remote Sense Compensates for 0.5 V lead drop
혜택
- Power fail Open collector logic signal
- Overload protection Short circuit and case overload protected
사양
출력 전력(W): | 150 |
---|---|
길이(인치): | 4 |
너비(인치): | 2 |
높이(인치): | 1.29 |
마운팅 유형: | Embedded PSU |
최소 출력 전류(A): | 0 |
최대 출력 전류(A): | 24 |
출력 전압 범위(V): | 4.5V to 59.4V |
기술 문서
관련 애플리케이션
모든 애플리케이션 살펴보기24시간 (24/5) 고객 지원
전문 엔지니어의 기술지원을 받아보세요.
저희는 고객에게 우수한 고객 서비스와 기술 지원을 제공하기 위해 최선을 다하고 있습니다. 실시간 채팅 및 전화 지원을 통해 언제든지 자격을 갖춘 엔지니어에게 도움을 요청할 수 있습니다.
지금 지원 받기