Latest Blog Posts
Blog
Advanced Energy in the Windy City – An Update from SVC TechCon 2024
June 11, 2024
By Kyle Moore
Every year the Society of Vacuum Coaters (SVC) – a non-profit, international, professional organization primarily devoted to coating and surface finishing using vacuum processes – brings together industry professionals, researchers and academics for SVC TechCon, the world’s largest technical expo for vacuum coating.
Editor's Picks
Blog
Dynamic Reverse Pulsing – What About the Anode?
December 04, 2023
By Gayatri Rane
A previous AE blog, Dynamic Reverse Pulsing – What About Duty Cycle?, discussed reactive sputter deposition of insulating thin films in large-area coaters, describing the benefits of using the Dynamic Reverse Pulse (DRP) power-delivery mode over the bipolar (BP) mode of dual magnetron sputtering. In DRP mode , dual targets are bipolar pulsed against an explicit anode and the duty cycle can be varied so that the polarity is positive on the target for a shorter time during pulsing. This allows clearing of charge build-up on the targets. In our studies, DRP mode showed increased deposition rate and reduced substrate temperature when compared to similar depositions with the BP mode.
Blog
CT Imaging: Navigating the Complex Power Needs of Current and Next Generation CT Systems
October 09, 2023
Computed Tomography (CT) is a computerized imaging technique used in radiology. A rapidly rotating X-ray beam and detector are used to generate cross-sectional images – so-called slices – that form the volumetric and very detailed internal image of the body.
All Blog Posts
Blog
Advanced Energy’s Year of Transformation
January 31, 2024
2023 was a year of transformation for Advanced Energy. In engineering, operations and digital, AE emerged stronger from the post-pandemic surge and leapt forward – better leveraging its collective of leading technologists, brands and operations to serve its customers better. Supported by a 40+ years of history, in 2023 AE was more effective, agile and inventive than ever – developing smaller, more
Blog
New Safety Standards and Medical Power Implication of Transition to IEC 60601-1 Edition 3.2
January 22, 2024
By Del Moses and Nesa Kandaiah
When certifying a medical product, updates to an industry standard can make for challenging times for medical equipment manufacturers, especially when a standard is costly to publish, impacting the cost of compliance as well.
Blog
Top 5 Medical Industry Trends from MEDICA 2023
December 27, 2023
By Dermot Flynn
Advanced Energy recently exhibited at the MEDICA and COMPAMED trade fair on November 13-16 in Dusseldorf, Germany. This year, MEDICA and COMPAMED drew more than 6,000 exhibitors and over 83,000 attendees from the medical industry.
Blog
Fine-Tuning for the Future: Enhancing Plasma Processes with Impedance Matching Networks
December 14, 2023
In the realm of semiconductor manufacturing, where precision and control are paramount, RF impedance matching networks play a critical role. These networks act as a bridge between the plasma source and the process chamber, optimizing power transfer and ensuring stable and efficient semiconductor processes.
Blog
Dynamic Reverse Pulsing – What About the Anode?
December 04, 2023
By Gayatri Rane
A previous AE blog, Dynamic Reverse Pulsing – What About Duty Cycle?, discussed reactive sputter deposition of insulating thin films in large-area coaters, describing the benefits of using the Dynamic Reverse Pulse (DRP) power-delivery mode over the bipolar (BP) mode of dual magnetron sputtering. In DRP mode , dual targets are bipolar pulsed against an explicit anode and the duty cycle can be varied so that the polarity is positive on the target for a shorter time during pulsing. This allows clearing of charge build-up on the targets. In our studies, DRP mode showed increased deposition rate and reduced substrate temperature when compared to similar depositions with the BP mode.
Blog
Top 5 Takeaways from OCP 2023
November 16, 2023
By Brian Korn
Last month marked our 6th year of engagement and partnership with the OCP community through the OCP Global Summit, which took place on Oct. 17 – 19 in San Jose, Calif. Our journey started with the ORv2 12V power shelf, and we’re now transitioning towards the next-generation 48V ORv3 power shelf.
Blog
Sputter Deposition of Indium Tin Oxide: To Pulse or Not to Pulse
October 30, 2023
By Gayatri Rane
Sputter deposition characteristics of indium tin oxide (ITO) from compound targets for applications as a transparent conductive oxide (TCO) have been widely investigated to find deposition processes that optimize film properties
Blog
Powering Electrosurgery: Precise Control and Delivery of RF Energy
October 23, 2023
By Todd Huston
Medical applications have made use of radio frequency (RF) energy in the form of electromagnetic waves or electrical currents for over 125 years. The ability to transect and seal vessels and tissue effectively and safely, for example, is a critical surgical task with RF-based techniques being the gold standard for cutting and cauterizing.