.svg){kind=logo}
1830A Thermistor-Based RF Power Meter
RF Thermistor Power Meter
Features
- Accuacy ±(0.05% of reading, ±0.5 µW)
- Supports 100 Ω and 200 Ω thermistors
- Integrates bridge balancer and power meter into one package
- Full remote programmability
- Heater control for ovenized sensors
- Power sensor calibration factor entry/correction
- Compatible with multiple manufacturer thermistor sensors (AE-TEGAM, Weinschel, HP/Agilent/Keysight, Hughes, General Microwave, Millitech)
- NSN: 6625-01-566-7703
- 3 Year Warranty
- Made in USA
Benefits
- Uncertainty is sufficiently small to be a minimal contributor in the overall uncertainty budget
- Replaces other thermistor power meters including the HP432
- Provides a digital readout of the power reading
- Provides a calibration factor corrected power reading (when entered)
- Programability enables automation in power sensor calibration systems
Specifications
| Basic Accuracy: | ±(0.05% of reading, ±0.5 µW) |
|---|---|
| Frequency Range: | 6 kHz to 50+ GHz (sensor Dependent) |
| Power Range: | -30 to +14 dBm (0.001 mW to 30 mW) |
| Power Requirements: | 100 to 240 Vac, 48 to 62 Hz, 75 VA max |
| Sensor Resistance: | 100 Ω, 200 Ω |
| Sensor Type: | Thermistor-NTC |
Recommended Products
Accessories Stock Check
Heater cable (4-pin mini to 4-pin large)
For use with the following combinations:
• 1806A connected to M1130A and M1135A
• 1830A connected to M1130A and M1135A
Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B
Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B
Technical Documentation
Services
Repair
Our worldwide service centers provide fast cycle times, use only AE-qualified parts, and follow the original product's specifications and test procedures for the highest quality repair or calibration.
| Product Family | Calibration | Calibration with Alignment |
Total Support Package (TSP) |
||||||
|---|---|---|---|---|---|---|---|---|---|
| Term of Agreement | Annual | One Year | Two Years | Three Years | Five Years | One Year | Two Years | Three Years | Five Years |
| TEGAM 5540 | | | | | | | | | |
| Lumasense | | | | | | | | ||
| Plasma Power | | | | | | | |||
Calibration and Alignment
Advanced Energy has the tools and processes to ensure your equipment continues to meet its original specifications. Our products are calibrated at global AE service sites with proprietary technology designed to exceed industry standards.
| Product Family | Calibration | Calibration with Alignment |
Total Support Package (TSP) |
||||||
|---|---|---|---|---|---|---|---|---|---|
| Term of Agreement | Annual | One Year | Two Years | Three Years | Five Years | One Year | Two Years | Three Years | Five Years |
| TEGAM 5540 | | | | | | | | | |
| Lumasense | | | | | | | | ||
| Plasma Power | | | | | | | |||
