.svg){kind=logo}
2510A Low Power RF Standard - Thermistor
Microwave Calibration Standard, Feedthrough, 10 MHz to 50 GHz
These RF Power Standards work with TEGAM’s 1830A RF Power Meter, as well as our legacy DC Self-Balancing Bridges, 1806 and 1806B. System configurations employing instruments of this accuracy typically achieve calibration factor transfer results normally found only in primary standards laboratories.
Features
- Calibrate RF Power Sensors from 10 MHz to 50 GHz
- 0.01 to 10 mW usable range (-20 to +10 dBm)
- Transfer Standard configuration
- PMX & SYSIIB Compatible
- Rack mount option available
- 3 year warranty
- Assembled in USA
Benefits
- Frequency range covers the calibration range of common sensors
- Designed specifically for power sensor calibration
- Calibrate sensors in multiple power ranges, utilizing optional attenuators
- Industry leading warranty
Specifications
| Calibration Factor Accuracy (typical): | +/-(1.0 to 4.0)% from 10 MHz to 50 GHz |
|---|---|
| Connector Type: | 2.4mm female |
| Frequency Range: | 10 MHz to 50 GHz |
| Power Range: | 0.01 to 10 mW (-20 to +10 dBm) |
| Reflection Magnitude (typical): | 0.01 to 0.25 from 10 MHz to 50 GHz |
| Required Power Meter: | Thermistor |
| RF Impedance (nominal): | 50 Ohms |
| Sensor Type: | Thermistor |
Accessories Stock Check
Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B
Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B
Transport case for 1505A and 1510A power standard
Note: 1510-910 is a standard item with a new purchase
of the 1505A or 1510A
Transport case for 1830A, F113X, 2505A, 2510A, M1130
and M1135
Technical Documentation
Related Products
Services
Repair
Our worldwide service centers provide fast cycle times, use only AE-qualified parts, and follow the original product's specifications and test procedures for the highest quality repair or calibration.
| Product Family | Calibration | Calibration with Alignment |
Total Support Package (TSP) |
||||||
|---|---|---|---|---|---|---|---|---|---|
| Term of Agreement | Annual | One Year | Two Years | Three Years | Five Years | One Year | Two Years | Three Years | Five Years |
| TEGAM 5540 | | | | | | | | | |
| Lumasense | | | | | | | | ||
| Plasma Power | | | | | | | |||
Calibration and Alignment
Advanced Energy has the tools and processes to ensure your equipment continues to meet its original specifications. Our products are calibrated at global AE service sites with proprietary technology designed to exceed industry standards.
| Product Family | Calibration | Calibration with Alignment |
Total Support Package (TSP) |
||||||
|---|---|---|---|---|---|---|---|---|---|
| Term of Agreement | Annual | One Year | Two Years | Three Years | Five Years | One Year | Two Years | Three Years | Five Years |
| TEGAM 5540 | | | | | | | | | |
| Lumasense | | | | | | | | ||
| Plasma Power | | | | | | | |||
