コンテンツへスキップ
tegam ®

1500/2500 Series RF Power Standards - Thermistor

Active

RF Power Standards - Thermistor

Advanced Energy's Temperature Stabilized Coaxial RF Power Transfer (Feedthrough) and Reference (Terminating) Thermistor Standards enable the precise measurement of microwave power in the 6 kHz to 50 GHz frequency range. The 1500/2500 Series standards are highly accurate and stable with time and temperature. They are designed to calibrate RF power sensors and RF transfer standards.

特徴

  • Calibrate RF Power Sensors from 6 kHz to 50GHz
  • 0.01 to 10 mW (-20 to +10 dBm) usable range
  • Reference (1500) and Transfer (2500) configurations
  • PMX Compatible
  • Rack mount option available
  • 3 year warranty
  • Assembled in USA

メリット

  • Frequency range covers the calibration range of common sensors
  • Designed specifically for power sensor calibration
  • Calibrate sensors in multiple power ranges, utilizing optional attenuators
  • Industry leading warranty

仕様

Frequency Range: 6 kHz to 50 GHz
Power Range: 0.01 to 10 mW (-20 to +10 dBm)
Required Power Meter: Thermistor
RF Impedance (nominal): 50 Ohms
Sensor Type: Thermistor

在庫チェック

モデル番号
Calibration Factor Accuracy (typical) Connector Type Frequency Range Power Range Required Power Meter 購入
1505A Active, お問い合わせ
Microwave Terminating Power Standard, 9 kHz – 18 GHz
+/-(0.9 to 1.2)% from 6 kHz to 18 GHz N- male 6 kHz to 18 GHz 0.01 to 10 mW (-20 to +10 dBm) Thermistor 購入
1510A Active, お問い合わせ
Microwave Terminating Power Standard, 10 MHz – 50 GHz Transport Case Included
+/-(1.2 to 4.2)% from 10 MHz to 50 GHz 2.4mm male 10 MHz to 50 GHz 0.01 to 10 mW (-20 to +10 dBm) Thermistor 購入
2505A Active, お問い合わせ
Microwave Calibration Standard, Feedthrough, 6 kHz to 18 GHz
+/-(0.7 to 1.0)% from 6 kHz to 18 GHz N- female 6 kHz to 18 GHz 0.01 to 10 mW (-20 to +10 dBm) Thermistor 購入
2510A Active, お問い合わせ
Microwave Calibration Standard, Feedthrough, 10 MHz-50 GHz
+/-(1.0 to 4.0)% from 10 MHz to 50 GHz 2.4mm female 10 MHz to 50 GHz 0.01 to 10 mW (-20 to +10 dBm) Thermistor 購入

Accessories Stock Check

Torque Wrench, 8mm, 5 in-lbs, SMA to 1585-1000
Torque Wrench, 3/4", 12 in-lbs, N (Standard Nut)
Torque Wrench, 13/16", 14 in-lbs, (Special 13/16" Nut on M1130A, M1125, M1110)
Attenuator, 20 dB, Type N Coax (M) to (F), with Data
Attenuator, 30dB, Type N Coax (M) to (F), with Data
Transport Case for 15XXA RF Power Standard

Transport case for 1505A and 1510A power standard
Note: 1510-910 is a standard item with a new purchase 
of the 1505A or 1510A

Adapter, 2.4 mm coax (M) to 2.92 mm (F) with Data
Adapter, 2.4 mm coax (M) to 3.5 mm (F) with Data
Test Cable with SMA Straight Plug Connectors, DC to 18 GHz, 3'
Low Loss RF Cable, 40 GHz, 2.92 mm (M) Connectors, 3'

Low loss RF cable, 40.0 GHz, 2.92mm male connectors
• Insertion loss max 3.6 dB

Single Unit Rack Mount Kit, 1830A, F113XB & 25XXA Series
Dual Unit Rack Mount Kit, 1830A, F113XB & 25XXA Series
Transport Case for 1830A, F113X & 25XXA

Transport case for 1830A, F113X, 2505A, 2510A, M1130
and M1135

Torque Wrench, 8 mm, 8 in-lbs, for 3.5 mm, 2.92 mm and 2.4 mm
Adapter, 2.4 mm coax (M) to 2.92 mm (F) with Data
Torque Wrench, 8 mm, 8 in-lbs, for 3.5 mm, 2.92 mm and 2.4 mm
Attenuator, 30 dB, 2.4 mm Coax (M) to (F) with Data
Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 15"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 48"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

Low Loss RF Cable, 50GHz, 2.4 mm (M) Connectors, 12", for PMX
Low Loss RF Cable, 50GHz, 2.4 mm (M) Connectors, 36", for PMX

Power Sensor Calibration Accessories

PM Series Accessories

技術文書

サービス

Repair

Our worldwide service centers provide fast cycle times, use only AE-qualified parts, and follow the original product's specifications and test procedures for the highest quality repair or calibration.

Agreement Term Options

Calibration and Alignment

Advanced Energy has the tools and processes to ensure your equipment continues to meet its original specifications.  Our products are calibrated at global AE service sites with proprietary technology designed to exceed industry standards​.

Agreement Term Options

24/5サポートをご利用下さい

エンジニアによる専門的なアドバイス

当社は、お客様に優れたカスタマーサービスとテクニカルサポートを提供することをお約束します。ライブチャットと電話サポートで、適任のエンジニアにいつでもご相談いただけます。
今すぐサポートを受ける