コンテンツへスキップ
言語
MyAE
Advanced Energy logo
ホーム Products Sense and Measurement RF Power Sensing Low Power RF Standards 1500/2500 Series RF Power Standards - Thermistor 1510A Low Power RF Standard - Thermistor
RF Terminating Power Standard 10 MHz to 50 GHz
tegam ®

1510A Low Power RF Standard - Thermistor

Active

Microwave Terminating Power Standard, 10 MHz to 50 GHz Transport Case Included

在庫チェック 営業担当 データシート
Advanced Energy's 1510A Temperature Stabilized Coaxial RF Power Reference (Terminating) Thermistor Standard enables the precise measurement of microwave power in the 10 MHz to 50 GHz frequency range. The 1510A standards are highly accurate and stable with time and temperature. They are designed to accurately measure RF power and calibrate RF transfer standards. The calibration of these standards is traceable to the International System of Units (SI) through the National Institute of Standards and Technology (NIST) or other recognized National Metrology Institutes.These RF Power Standards work with TEGAM’s 1830A RF Power Meter, as well as our legacy DC Self-Balancing Bridges, 1806 and 1806B. System configurations employing instruments of this accuracy typically achieve calibration factor transfer results normally found only in primary standards laboratories. Transport case is included.
 

特徴

  • Calibrate RF transfer standards and measure RF power from 10 MHz to 50 GHz
  • 0.01 to 10 mW (-20 to +10 dBm) usable range
  • PMX & SYSIIB Compatible
  • Rack mount option available
  • 3 year warranty
  • Assembled in USA

メリット

  • Designed to match the freqeuncy range of AE-TEGAM 2500 series transfer standards for compatible calibration
  • Can be sent directly to NMI for highest level calibrations
  • Industry leading warranty

仕様

Calibration Factor Accuracy (typical): +/-(1.2 to 4.2)% from 10 MHz to 50 GHz
Connector Type: 2.4mm male
Frequency Range: 10 MHz to 50 GHz
Power Range: 0.01 to 10 mW (-20 to +10 dBm)
Reflection Magnitude (typical): 0.01 to 0.34 from 10 MHz to 50 GHz
Required Power Meter: Thermistor
RF Impedance (nominal): 50 Ohms
Sensor Type: Thermistor
すべての仕様 仕様の崩壊

在庫チェック

モデル番号
 Calibration Factor Accuracy (typical) Connector Type Frequency Range Power Range Required Power Meter 購入
1510A Active, お問い合わせ
Microwave Terminating Power Standard, 10 MHz – 50 GHz Transport Case Included
+/-(1.2 to 4.2)% from 10 MHz to 50 GHz 2.4mm male 10 MHz to 50 GHz 0.01 to 10 mW (-20 to +10 dBm) Thermistor 購入

Recommended Products

RF Thermistor Power Meter that supports 100 Ω and 200 Ω thermistors

特集

1830A Thermistor-Based RF Power Meter

RF Thermistor Power Meter

データシート

Accessories Stock Check

1510-911-01
Active, お問い合わせ
Adapter, 2.4 mm coax (M) to 2.92 mm (F) with Data
購入
1510-912-01
Active, お問い合わせ
Adapter, 2.4 mm coax (M) to 3.5 mm (F) with Data
購入
2510-911-01
Active, お問い合わせ
Adapter, 2.4 mm coax (M) to 2.92 mm (F) with Data
購入
2510-912-01
Active, お問い合わせ
Torque Wrench, 8 mm, 8 in-lbs, for 3.5 mm, 2.92 mm and 2.4 mm
購入
2510-913-01
Active, お問い合わせ
Attenuator, 30 dB, 2.4 mm Coax (M) to (F) with Data
購入
CA-21-15
Active, お問い合わせ
Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 15"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

購入
CA-21-48
Active, お問い合わせ
Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 48"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

購入
CA-28-48
Active, お問い合わせ
Cable, 1806A to 15XXA/25XXA
購入
CA-29-48
Active, お問い合わせ
Cable, 1806 to 15XXA/25XXA
購入
2510-910-01
Active, お問い合わせ
Torque Wrench, 8 mm, 8 in-lbs, for 3.5 mm, 2.92 mm and 2.4 mm
購入
1500-910
Active, お問い合わせ
Transport Case for 15XXA RF Power Standard

Transport case for 1505A and 1510A power standard
Note: 1510-910 is a standard item with a new purchase 
of the 1505A or 1510A

購入
2500-910
Active, お問い合わせ
Transport Case for 1830A, F113X & 25XXA

Transport case for 1830A, F113X, 2505A, 2510A, M1130
and M1135

購入

Power Sensor Calibration Accessories

PM Series Accessories

View Page

技術文書

タイトル タイプ
1510/2510A Datasheet (457 KB) データシート
1830A Cable Connection Guide (273 KB) Guide
1510A / 2510A Manual (1 MB) マニュアル

関連商品

9 kHz to 18 GHz RF Terminating Power Standard

特集

1505A Low Power RF Standard - Thermistor

Microwave Terminating Power Standard, 9 kHz – 18 GHz

データシート

Microwave Calibration Standard 2505A

特集

2505A Low Power RF Standard - Thermistor

Microwave Calibration Standard, Feedthrough, 6 kHz to 18 GHz

データシート

10 MHz to 50 GHz Temperature Controlled Coaxial RF Feedthrough RF Power Transfer Standard

特集

2510A Low Power RF Standard - Thermistor

Microwave Calibration Standard, Feedthrough, 10 MHz-50 GHz

データシート

2818A RF Power Transfer Standard

特集

2818A RF Power Standard - Thermoelectric

RF Transfer Standard

データシート

サービス

Repair

Our worldwide service centers provide fast cycle times, use only AE-qualified parts, and follow the original product's specifications and test procedures for the highest quality repair or calibration.

Agreement Term Options

Calibration and Alignment

Advanced Energy has the tools and processes to ensure your equipment continues to meet its original specifications.  Our products are calibrated at global AE service sites with proprietary technology designed to exceed industry standards​.

Agreement Term Options
Submit an RMA Form

24/5サポートをご利用下さい

エンジニアによる専門的なアドバイス

当社は、お客様に優れたカスタマーサービスとテクニカルサポートを提供することをお約束します。ライブチャットと電話サポートで、適任のエンジニアにいつでもご相談いただけます。
今すぐサポートを受ける

Looking for the right solution? Let's chat!

Chat Now Just Browsing