콘텐츠로 건너뛰기
언어
MyAE
Advanced Energy logo
홈 Products Sense and Measurement RF Power Sensing Low Power RF Power Meters Precision RF Power Meters - Thermistors 1830A Thermistor-Based RF Power Meter
RF Thermistor Power Meter that supports 100 Ω and 200 Ω thermistors
tegam ®

1830A Thermistor-Based RF Power Meter

Active

RF Thermistor Power Meter

재고 확인 데이터 시트
Thermistor-based RF power sensors are recognized as an exceptionally accurate means to measure and transfer RF power. The TEGAM Model 1830A thermistor power meter was designed to replace the HP432 while reducing uncertainties and accommodating a wider variety of RF power sensors. It combines a modern DC substitution bridge with a 6.5 digit measurement system to provide consistent normalized RF power readings manually or automatically. We leveraged our experience building Type IV bridges to develop superior DC substitution power meters with advanced analog and digital electronics that provide exceptionally low uncertainties in a portable instrument.

특징

  • Accuacy ±(0.05% of reading, ±0.5 µW)
  • Supports 100 Ω and 200 Ω thermistors
  • Integrates bridge balancer and power meter into one package
  • Full remote programmability
  • Heater control for ovenized sensors
  • Power sensor calibration factor entry/correction
  • Compatible with multiple manufacturer thermistor sensors (AE-TEGAM, Weinschel, HP/Agilent/Keysight, Hughes, General Microwave, Millitech)
  • NSN: 6625-01-566-7703
  • 3 Year Warranty
  • Made in USA

혜택

  • Uncertainty is sufficiently small to be a minimal contributor in the overall uncertainty budget
  • Replaces other thermistor power meters including the HP432
  • Provides a digital readout of the power reading
  • Provides a calibration factor corrected power reading (when entered)
  • Programability enables automation in power sensor calibration systems

사양

Basic Accuracy: ±(0.05% of reading, ±0.5 µW)
Frequency Range: 6 kHz to 50+ GHz (sensor Dependent)
Power Range: -30 to +14 dBm (0.001 mW to 30 mW)
Power Requirements: 100 to 240 Vac, 48 to 62 Hz, 75 VA max
Sensor Resistance: 100 Ω, 200 Ω
Sensor Type: Thermistor-NTC

재고 확인

모델 번호
 Basic Accuracy Frequency Range Power Range Power Requirements Sensor Resistance Sensor Type 구매
1830A Active, 문의하기
RF Thermistor Power Meter
±(0.05% of reading, ±0.5 µW) 6 kHz to 50+ GHz (sensor Dependent) -30 to +14 dBm (0.001 mW to 30 mW) 100 to 240 Vac, 48 to 62 Hz, 75 VA max 100 Ω, 200 Ω Thermistor-NTC 구매

Recommended Products

9 kHz to 18 GHz RF Terminating Power Standard

추천

1505A Low Power RF Standard - Thermistor

Microwave Terminating Power Standard, 9 kHz – 18 GHz

데이터 시트

RF Terminating Power Standard 10 MHz to 50 GHz

추천

1510A Low Power RF Standard - Thermistor

Microwave Terminating Power Standard, 10 MHz – 50 GHz Transport Case Included

데이터 시트

Microwave Calibration Standard 2505A

추천

2505A Low Power RF Standard - Thermistor

Microwave Calibration Standard, Feedthrough, 6 kHz to 18 GHz

데이터 시트

10 MHz to 50 GHz Temperature Controlled Coaxial RF Feedthrough RF Power Transfer Standard

추천

2510A Low Power RF Standard - Thermistor

Microwave Calibration Standard, Feedthrough, 10 MHz-50 GHz

데이터 시트

제품 더 보기

Accessories Stock Check

CA-7-15
Active, 문의하기
Cable, 1830A to F/M Mounts, 15"
구매
CA-7-48
Active, 문의하기
Cable, 1830A to F/M Mounts, 48"
구매
CA-10-48
Active, 문의하기
Cable, 1830A and 1806A to Large Heater, 48"

Heater cable (4-pin mini to 4-pin large)
For use with the following combinations:
• 1806A connected to M1130A and M1135A
• 1830A connected to M1130A and M1135A

구매
CA-11-15
Active, 문의하기
Cable, 1830A and 1806A to Small Heater, 15"
구매
CA-11-48
Active, 문의하기
Cable, 1830A and 1806A to Small Heater, 48"
구매
CA-21-48
Active, 문의하기
Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 48"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

구매
CA-21-15
Active, 문의하기
Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 15"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

구매
CA-20-48
Active, 문의하기
Calibration Cable for the 1830A with Spade Lugs, 48"
구매
CA-6-48
Active, 문의하기
Cable, Sensor, 1830A to 8478B and 478A Sensor, 48"
구매
CA-14-2M
Active, 문의하기
Cable, USB A/A 2M
구매
1830-910
Active, 문의하기
Single Unit Rack Mount Kit, 1830A, F113XB & 25XXA Series
구매
1830-911
Active, 문의하기
Dual Unit Rack Mount Kit, 1830A, F113XB & 25XXA Series
구매
CA-9-48
Active, 문의하기
Cable, 1830A to Unterminated Ends, 48"
구매

Power Sensor Calibration Accessories

PM Series Accessories

View Page

기술 문서

제목 유형
AN217: Measuring Temperature Compensating Thermistors with the TEGAM Model 1830A RF Power Meter (250 KB) 애플리케이션 노트
EU Declaration of Conformity for 1830A (90 KB) 인증서
1830A Data Sheet (369 KB) 데이터 시트
1830A Cable Connection Guide (273 KB) Guide
1830A Quick Start Guide (558 KB) Guide
Procedure for Performance Testing and Calibration of a Power Meter’s 50 MHz Reference (118 KB) Guide
Thermistor Power Meter Comparison Chart (52 KB) Guide
1830A Firmware Release Notes (545 KB) 설치 참고 사항
1830A Manual (2 MB) 매뉴얼
1830A IVI Driver (3 MB) 소프트웨어
1830A USB Serial Driver – 64 bit (302 KB) 소프트웨어
1830A USB Serial Drivers – 32 bit (299 KB) 소프트웨어

서비스

Repair

Our worldwide service centers provide fast cycle times, use only AE-qualified parts, and follow the original product's specifications and test procedures for the highest quality repair or calibration.

Agreement Term Options

Calibration and Alignment

Advanced Energy has the tools and processes to ensure your equipment continues to meet its original specifications.  Our products are calibrated at global AE service sites with proprietary technology designed to exceed industry standards​.

Agreement Term Options
Submit an RMA Form

24시간 (24/5) 고객 지원

전문 엔지니어의 기술지원을 받아보세요.

저희는 고객에게 우수한 고객 서비스와 기술 지원을 제공하기 위해 최선을 다하고 있습니다. 실시간 채팅 및 전화 지원을 통해 언제든지 자격을 갖춘 엔지니어에게 도움을 요청할 수 있습니다.
지금 지원 받기