콘텐츠로 건너뛰기
tegam ®

1505A Low Power RF Standard - Thermistor

Active

Microwave Terminating Power Standard, 9 kHz to 18 GHz Transport Case Included

Advanced Energy's 1505A Temperature Stabilized Coaxial RF Power Reference (Terminating) Thermistor Standard enables the precise measurement of microwave power in the 6 kHz to 18 GHz frequency range. The 1505A standards are highly accurate and stable with time and temperature. They are designed to accurately measure RF power and calibrate RF transfer standards. The calibration of these standards is traceable to the International System of Units (SI) through the National Institute of Standards and Technology (NIST) or other recognized National Metrology Institutes.These RF Power Standards work with TEGAM’s 1830A RF Power Meter, as well as our legacy DC Self-Balancing Bridges, 1806 and 1806B. System configurations employing instruments of this accuracy typically achieve calibration factor transfer results normally found only in primary standards laboratories. Transport case is included.


 

특징

  • Calibrate RF transfer standards and measure RF power from 6 kHz to 18 GHz
  • 0.01 to 10 mW (-20 to +10 dBm) usable range
  • PMX & SYSIIB Compatible
  • Rack mount option available
  • 3 year warranty
  • Assembled in USA

혜택

  • Designed to match the freqeuncy range of AE-TEGAM 2500 series transfer standards for compatible calibration
  • Can be sent directly to NMI for highest level calibrations
  • Industry leading warranty

사양

Calibration Factor Accuracy (typical): +/-(0.9 to 1.2)% from 6 kHz to 18 GHz
Connector Type: N- male
Frequency Range: 6 kHz to 18 GHz
Power Range: 0.01 to 10 mW (-20 to +10 dBm)
Reflection Magnitude (typical): 0.03 to 0.25 from 6 kHz to 18 GHz
Required Power Meter: Thermistor
RF Impedance (nominal): 50 Ohms
Sensor Type: Thermistor
모든 사양 사양 축소

재고 확인

모델 번호
Calibration Factor Accuracy (typical) Connector Type Frequency Range Power Range Required Power Meter 구매
1505A Active, 문의하기
Microwave Terminating Power Standard, 9 kHz – 18 GHz
+/-(0.9 to 1.2)% from 6 kHz to 18 GHz N- male 6 kHz to 18 GHz 0.01 to 10 mW (-20 to +10 dBm) Thermistor 구매

Accessories Stock Check

Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 15"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 48"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

Cable, 1806A to 15XXA/25XXA
Cable, 1806 to 15XXA/25XXA
Torque Wrench, 8 mm, 8 in-lbs, for 3.5 mm, 2.92 mm and 2.4 mm
Transport Case for 15XXA RF Power Standard

Transport case for 1505A and 1510A power standard
Note: 1510-910 is a standard item with a new purchase 
of the 1505A or 1510A

Transport Case for 1830A, F113X & 25XXA

Transport case for 1830A, F113X, 2505A, 2510A, M1130
and M1135

Power Sensor Calibration Accessories

PM Series Accessories

기술 문서

서비스

Repair

Our worldwide service centers provide fast cycle times, use only AE-qualified parts, and follow the original product's specifications and test procedures for the highest quality repair or calibration.

Agreement Term Options

Calibration and Alignment

Advanced Energy has the tools and processes to ensure your equipment continues to meet its original specifications.  Our products are calibrated at global AE service sites with proprietary technology designed to exceed industry standards​.

Agreement Term Options

24시간 (24/5) 고객 지원

전문 엔지니어의 기술지원을 받아보세요.

저희는 고객에게 우수한 고객 서비스와 기술 지원을 제공하기 위해 최선을 다하고 있습니다. 실시간 채팅 및 전화 지원을 통해 언제든지 자격을 갖춘 엔지니어에게 도움을 요청할 수 있습니다.
지금 지원 받기

Looking for the right solution? Let's chat!

Chat Now Just Browsing